

Weighing Scale Baby:
It can measure up to 20 Kg.
Model: EQ 788
Clinic Use
This Weighing machine is well constructed
with great precision and high sensitivity. It's Load-carrying. Installation
consists of a lever mechanism, knife edges and bearings, and platform, giving
stability, accuracy and durability. The platform is covered with rubber sheet
to prevent slipping and to offer shockproofness to the internal mechanism.
A self -indicating dial is equipped for easy reading, showing accurate weight
both in Metric and in British systems by an indicator which is connected with
the lever mechanism by means of gears and coiled spring. When not in use,
the indicator should point at the "0° position. If there is any deviation,
adjust the indicator by turning the screw under the dial.
The Height Measuring Standard is composed of three round tubes of different
calitres the outer tube is rigidly fixed onto the column of the dial, while
the middle and the inner tubes are closely inserted there in one after the
other with both Metric and British units graduated thereon. On the, top of
the inner tube, there is a movable headpiece which should be pulled out at
right angle with the measuring standard before use. When measuring height,
first stretch the inner tube to its full length sufficient for a range of
70-126cm. (27t/2-49t/zin.) The reading can be obtained from the point where
the graduation of the inner tube coincides with the upper flange edge of the
medium tube. Incase the height " is over 126cm. then pull out the middle tube
for a .measuring range of 126 190cm. (491/z-743/4in.), and the reading is
to be taken from the point where the graduation of the middle tube and the
upper flange edge of the outer tube join together.
Specification
| Body Weighing maximum weight | 120Kgs. (265 lbs. | |
| Sub-divisions of the Weighing Dial | 0.5 Kg. | |
| Hight Measuremet Range | 70--190cm.(27 1/2---73 3/4in.) | |
| Size of platform (L x W) | 385x280mm | |
| Overall Dimensions (LxWxH) | 900x350x350 mm | |
| Weight | 24 Kgs |
![]() |
FRAGO IMPEX
SDN. BHD.
15-1, Jalan A, Taman Batu, Kuala Lumpur, MALAYSIA. Tel:00-603-62525637 FAX:603-62533476 E-mail: lasani@fragoimpex.com MANUFACTURER OF SURGICAL / DENTAL INSTRUMENTS. |
![]() |
--------------------------------------------------------------------------------
©2003, All Rights Reserved, Frago Impex.